Treon Industrial Node 6
Treon Industrial Node 6 measures tri-axial vibration and surface temperature of rotating equipment, such as pumps, motors, and compressors, with a frequency range up to 6.3kHz.
Treon Industrial Node 6 measures tri-axial vibration and surface temperature of rotating equipment, such as pumps, motors, and compressors, with a frequency range up to 6.3kHz.
This patented technology is protected by US Patent 11656239.
Features
- Frequency range up to 6.3kHz.
- 3-axis accelerometer and temperature sensor.
- Advanced signal processing on the edge calculating key vibration KPIs such as RMS, PEAK, kurtosis, and crest factor - from acceleration and velocity or root-cause analysis through FFTs.
- Battery operated sensor - no wiring needed.
- Wide operating temperature -40°C to +85°C
Common Specifications
Dimensions: 78.5 x 28mm
Weight: 129g
Mounting: M8 x 1.25 thread
Materials
Cover material: 316ss
Top cap material: PA
Environment
Operating temperature: -40°C to +85°C
Storage temperature: 10°C to 30°C
IP rating: IP67
Technical Specifications
Wireless communication
2.4GHz / Wirepas Mesh
Battery
3.6V lithium thionyl chloride
Battery lifetime up to 5 years
(Battery life is dependent on operating temperature and configuration)
Software
Fully configurable data delivery
Vibration
Triaxial acceleration measurement
Dynamic range +/- 2, 4, 8 or 16
Frequency range 2-6300Hz (+/-3dB) (Mounting dependent)
Sampling rate 26.7kHz
Resolution 16bit
Temperature
Measurement range -40°C to +105°C
Resolution 0.1°C
Accuracy +/- 0.3°C
Repeatability +/- 0.1°C
Key performance indicators
Velocity: RMS, PEAK, P2P
Acceleration: RMS, PEAK, P2P, kurtosis, crest factor
Sample amounts
Single axis, max. 110592 samples
Triaxial, max. 36864 samples per axis
Signal processing
Butterworth high, low and band pass filter
Configurable low and high cut-off
Decimation configurable, max. ratio 1:9
FFT Calculation
Sample amount 4096
Lines of resolution 1600
Averages, max. 9
Overlap, 0 to 100%
Hanning windowing
Certifications
Check 'Downloads' section for Certification Leaflet
HS code: 8517699000
Patent: This patented technology is protected by US Patent 11656239.
Please note: Treon Industrial Node 6 should be screwed to the surface with 30mm torque wrench to max. 8 Nm torque.